Trade toughened safety glass in Wiltshire

Ordering toughened safety glass for jobs in Wiltshire

Low-iron glass removes the green tint of standard float, which matters on thicker panes and splashbacks.

For balustrades and structural uses, the glass type and thickness should come from the system designer or engineer, not chosen on site.

Specification at a glance

• Polished or ground edges
• Holes, notches and cut-outs before toughening
• Toughened to BS EN 12150
• Clear, low-iron, tinted and obscure options
• Thicknesses typically from 4mm to 12mm

Delivery across Wiltshire

Deliveries to Wiltshire are booked once your order is in production. The charge is itemised on the quote and the delivery day is confirmed with you in advance.

Building regulations in England

Under Approved Document K, glazing in critical locations (doors, and side panels within 300mm of a door, up to 1500mm above floor level; other glazing below 800mm) must break safely, be robust or in small panes, or be permanently protected. Toughened and laminated safety glass are classified to BS EN 12600. Replacing only the glass in an existing frame is generally treated as a repair rather than notifiable work.

Before anything goes into production you get a written order acknowledgement with sizes, finishes and handing for every item. Check it carefully, because made-to-measure items cannot be returned if the sizes were wrong.