Doors

Trade aluminium entrance doors

Aluminium entrance doors for residential front doors and commercial entrances, supplied with frame, threshold and hardware, and glazed side screens if needed. Commercial doors can be specified with closers, panic hardware and accessible thresholds.

Product code
TG-D07
Guide trade price
£950 to £2,450 per door, ex VAT, supply only
Lead time
Aluminium doors are typically made in 4 to 5 weeks from a confirmed order.
Delivery
UK-wide to site, yard or unit, priced on your quote
Category
Doors
Grey aluminium glazed commercial entrance door with a side screen on a small brick office building
WH

Typical layout. W and H are the frame or glass sizes you give us.

What is in the specification?

  • Thermally broken or non-thermal aluminium sections
  • Single and double doors with side screens and fanlights
  • Overhead or concealed door closers
  • Lever, pull-handle and panic hardware options
  • Toughened or laminated safety glass
  • Low accessible thresholds
  • Powder coated RAL colours

Options you can add

  • Side screens and fanlights
  • Door closers
  • Panic and emergency exit hardware
  • Electric strike provision
  • Laminated glass
  • Kick plates

Who orders trade aluminium entrance doors?

Mostly shopfitters, builders and main contractors, property maintenance companies and architects and specifiers. Typical uses include office and commercial entrances; residential contemporary front doors; communal entrances to flats.

Commercial entrance doors are often specified around access and escape. Give us the clear opening width and any escape or access requirements and we confirm the hardware on the quote.

Door closers, panic hardware and electric strikes affect how the frame is prepared, so they need to be decided before manufacture.

For communal entrances to flats, access control is usually supplied and wired by a separate contractor. We can prepare the frame for an electric strike if you tell us the model.

Residential aluminium front doors can be single colour or dual colour, with flush or rebated leaves depending on the system.

How should you measure?

For commercial entrances, give us the clear opening width you need, not just the structural opening; the door and frame are sized from it.

Which building regulations apply?

Replacement external doors in England should meet a U-value of 1.4 W/m²K under Approved Document L. Glass in doors and side panels below 1500mm is a critical location under Approved Document K, so it must break safely (toughened or laminated to BS EN 12600), be robust or in small panes, or be permanently protected. Doors into new homes also need to meet Approved Document Q for security, which is usually shown with PAS 24. Replacing a door that is more than half glazed is notifiable building work, self-certified through a competent person scheme or approved by building control.

Wales

In Wales, replacement external doors must meet Approved Document L (Wales), and glass in doors and side panels in critical locations must meet the safety glazing guidance in Approved Document N, usually with toughened or laminated safety glass. Replacing a door that is more than half glazed is notifiable building work, self-certified through a competent person scheme or approved by building control.

Scotland

In Scotland, replacement doors in a house do not normally need a building warrant, but they must still meet the building standards in the Technical Handbooks, including energy and safety glazing. Check with the local authority for flats, listed buildings and conservation areas.

Northern Ireland

In Northern Ireland, replacement doors should meet the energy guidance in Technical Booklet F1, and glass in doors and side panels the glazing safety guidance in Booklet V. Check with your council's building control service before work starts.

More detail: Approved Document L guide safety glazing guide. Your installer or designer remains responsible for compliance and any notification.

How ordering works

  1. List what you need

    One line per window, door or unit, with width, height and finish.

  2. Check your quote

    We price each item and flag anything that needs clarifying.

  3. Confirm the order

    Production starts only after you approve the written order.

  4. Receive your goods

    We aim to deliver on the confirmed date; check the goods against the delivery note.

Questions trade customers ask

Can you supply panic hardware?

Yes, panic and emergency exit hardware can be specified. The fire strategy for the building decides what is needed.

Do you supply automatic doors?

No. We supply manual aluminium doors; automatic operators are a separate specialist product.

Can the frame be prepared for access control?

Yes, for an electric strike or maglock if you give us the model when you order.

What is a clear opening width?

The usable width when the door is open, between the door leaf and the frame. Accessibility guidance sets minimums for different building types.

Request trade prices

Send your sizes and we return an itemised trade quote.

We use these details to reply to your enquiry. See our privacy notice.

CallWhatsAppTrade prices