Trade aluminium entrance doors in Warwickshire

Ordering aluminium entrance doors for jobs in Warwickshire

Door closers, panic hardware and electric strikes affect how the frame is prepared, so they need to be decided before manufacture.

For communal entrances to flats, access control is usually supplied and wired by a separate contractor. We can prepare the frame for an electric strike if you tell us the model.

Specification at a glance

• Thermally broken or non-thermal aluminium sections
• Overhead or concealed door closers
• Single and double doors with side screens and fanlights
• Powder coated RAL colours
• Low accessible thresholds

Delivery across Warwickshire

We deliver to sites and yards in Warwickshire as part of our mainland delivery service. Delivery is priced on the quote, so you know the full cost before you place the order.

Building regulations in England

Replacement external doors in England should meet a U-value of 1.4 W/m²K under Approved Document L. Glass in doors and side panels below 1500mm is a critical location under Approved Document K, so it must break safely (toughened or laminated to BS EN 12600), be robust or in small panes, or be permanently protected. Doors into new homes also need to meet Approved Document Q for security, which is usually shown with PAS 24. Replacing a door that is more than half glazed is notifiable building work, self-certified through a competent person scheme or approved by building control.

We do not start manufacturing until you have approved the order acknowledgement. It repeats each size, colour and opening direction so you can check it against your survey.