Trade aluminium entrance doors in Staffordshire

Ordering aluminium entrance doors for jobs in Staffordshire

Door closers, panic hardware and electric strikes affect how the frame is prepared, so they need to be decided before manufacture.

For communal entrances to flats, access control is usually supplied and wired by a separate contractor. We can prepare the frame for an electric strike if you tell us the model.

Specification at a glance

• Single and double doors with side screens and fanlights
• Thermally broken or non-thermal aluminium sections
• Lever, pull-handle and panic hardware options
• Toughened or laminated safety glass
• Overhead or concealed door closers

Delivery across Staffordshire

Orders for Staffordshire go out on our mainland routes. The delivery charge and date are shown on your quote, and the date is confirmed when your order is acknowledged.

Building regulations in England

Replacement external doors in England should meet a U-value of 1.4 W/m²K under Approved Document L. Glass in doors and side panels below 1500mm is a critical location under Approved Document K, so it must break safely (toughened or laminated to BS EN 12600), be robust or in small panes, or be permanently protected. Doors into new homes also need to meet Approved Document Q for security, which is usually shown with PAS 24. Replacing a door that is more than half glazed is notifiable building work, self-certified through a competent person scheme or approved by building control.

Before anything goes into production you get a written order acknowledgement with sizes, finishes and handing for every item. Check it carefully, because made-to-measure items cannot be returned if the sizes were wrong.