Trade toughened safety glass in Devon

Ordering toughened safety glass for jobs in Devon

Toughened glass cannot be cut, drilled or edged once it has been toughened. Every hole, notch and cut-out must be on the order before processing.

For balustrades and structural uses, the glass type and thickness should come from the system designer or engineer, not chosen on site.

Specification at a glance

• Holes, notches and cut-outs before toughening
• Safety marking on each piece
• Toughened to BS EN 12150
• Polished or ground edges
• Clear, low-iron, tinted and obscure options

Delivery across Devon

We deliver to sites and yards in Devon as part of our mainland delivery service. Delivery is priced on the quote, so you know the full cost before you place the order.

Building regulations in England

Under Approved Document K, glazing in critical locations (doors, and side panels within 300mm of a door, up to 1500mm above floor level; other glazing below 800mm) must break safely, be robust or in small panes, or be permanently protected. Toughened and laminated safety glass are classified to BS EN 12600. Replacing only the glass in an existing frame is generally treated as a repair rather than notifiable work.

Every order is confirmed in writing first. The acknowledgement lists each item exactly as it will be made, so any mistake in a size or handing can be caught before manufacture.