Trade toughened safety glass in County Durham

Ordering toughened safety glass for jobs in County Durham

Toughened glass cannot be cut, drilled or edged once it has been toughened. Every hole, notch and cut-out must be on the order before processing.

Low-iron glass removes the green tint of standard float, which matters on thicker panes and splashbacks.

Specification at a glance

• Thicknesses typically from 4mm to 12mm
• Holes, notches and cut-outs before toughening
• Safety marking on each piece
• Clear, low-iron, tinted and obscure options
• Polished or ground edges

Delivery across County Durham

We deliver to sites and yards in County Durham as part of our mainland delivery service. Delivery is priced on the quote, so you know the full cost before you place the order.

Building regulations in England

Under Approved Document K, glazing in critical locations (doors, and side panels within 300mm of a door, up to 1500mm above floor level; other glazing below 800mm) must break safely, be robust or in small panes, or be permanently protected. Toughened and laminated safety glass are classified to BS EN 12600. Replacing only the glass in an existing frame is generally treated as a repair rather than notifiable work.

We do not start manufacturing until you have approved the order acknowledgement. It repeats each size, colour and opening direction so you can check it against your survey.