Trade toughened safety glass in the West Midlands

Ordering toughened safety glass for jobs in the West Midlands

Each toughened pane carries a permanent mark to BS EN 12150, which helps when the installation is inspected.

Low-iron glass removes the green tint of standard float, which matters on thicker panes and splashbacks.

Specification at a glance

• Toughened to BS EN 12150
• Clear, low-iron, tinted and obscure options
• Thicknesses typically from 4mm to 12mm
• Holes, notches and cut-outs before toughening
• Safety marking on each piece

Delivery across the West Midlands

We deliver to sites and yards in the West Midlands as part of our mainland delivery service. Delivery is priced on the quote, so you know the full cost before you place the order.

Building regulations in England

Under Approved Document K, glazing in critical locations (doors, and side panels within 300mm of a door, up to 1500mm above floor level; other glazing below 800mm) must break safely, be robust or in small panes, or be permanently protected. Toughened and laminated safety glass are classified to BS EN 12600. Replacing only the glass in an existing frame is generally treated as a repair rather than notifiable work.

Before anything goes into production you get a written order acknowledgement with sizes, finishes and handing for every item. Check it carefully, because made-to-measure items cannot be returned if the sizes were wrong.