Trade toughened safety glass in Rawmarsh

Toughened safety glass for Rawmarsh jobs

For balustrades and structural uses, the glass type and thickness should come from the system designer or engineer, not chosen on site.

Toughened glass cannot be cut, drilled or edged once it has been toughened. Every hole, notch and cut-out must be on the order before processing.

• Thicknesses typically from 4mm to 12mm
• Safety marking on each piece
• Polished or ground edges
• Holes, notches and cut-outs before toughening

Delivery to Rawmarsh

Deliveries to Rawmarsh are booked once your order is in production. The charge is itemised on the quote and the delivery day is confirmed with you in advance. Postcode districts include S62.

Getting a price

List every item on one schedule with sizes in millimetres, width first. Add the finish and options per line and we price each one.

Open a trade account to order at trade prices. We ask for your business details and how you expect to order, and agree terms when the account is set up.

Measuring tip

Toughened glass cannot be cut or drilled after toughening, so all holes and cut-outs must be on your drawing before we process it.

Regulations for jobs in Rawmarsh

Under Approved Document K, glazing in critical locations (doors, and side panels within 300mm of a door, up to 1500mm above floor level; other glazing below 800mm) must break safely, be robust or in small panes, or be permanently protected. Toughened and laminated safety glass are classified to BS EN 12600. Replacing only the glass in an existing frame is generally treated as a repair rather than notifiable work.