Trade toughened safety glass in Royton

Toughened safety glass for Royton jobs

Each toughened pane carries a permanent mark to BS EN 12150, which helps when the installation is inspected.

For balustrades and structural uses, the glass type and thickness should come from the system designer or engineer, not chosen on site.

• Safety marking on each piece
• Thicknesses typically from 4mm to 12mm
• Holes, notches and cut-outs before toughening
• Polished or ground edges

Delivery to Royton

Orders for Royton go out on our mainland routes. The delivery charge and date are shown on your quote, and the date is confirmed when your order is acknowledged. Postcode districts include OL2.

Getting a price

The quickest way to get a price is a schedule listing each item with its size, quantity, finish and options. Email it to us or send a photo of it on WhatsApp.

Trade accounts are open to installers, builders, developers, landlords and property businesses. Apply online and your account terms are agreed when it is opened.

Measuring tip

Toughened glass cannot be cut or drilled after toughening, so all holes and cut-outs must be on your drawing before we process it.

Regulations for jobs in Royton

Under Approved Document K, glazing in critical locations (doors, and side panels within 300mm of a door, up to 1500mm above floor level; other glazing below 800mm) must break safely, be robust or in small panes, or be permanently protected. Toughened and laminated safety glass are classified to BS EN 12600. Replacing only the glass in an existing frame is generally treated as a repair rather than notifiable work.