Trade toughened safety glass in Acton

Toughened safety glass for Acton jobs

Toughened glass cannot be cut, drilled or edged once it has been toughened. Every hole, notch and cut-out must be on the order before processing.

For balustrades and structural uses, the glass type and thickness should come from the system designer or engineer, not chosen on site.

• Thicknesses typically from 4mm to 12mm
• Holes, notches and cut-outs before toughening
• Clear, low-iron, tinted and obscure options
• Safety marking on each piece

Delivery to Acton

For Acton, delivery is to your site, yard or unit. Tell us about any access limits, such as weight restrictions or narrow streets, so the right vehicle is booked. Postcode districts include W3.

Getting a price

Give us width by height in millimetres for each item, the quantity, and the finish. We check the schedule and come back with anything that needs clarifying.

Open a trade account to order at trade prices. We ask for your business details and how you expect to order, and agree terms when the account is set up.

Measuring tip

Toughened glass cannot be cut or drilled after toughening, so all holes and cut-outs must be on your drawing before we process it.

Regulations for jobs in Acton

Under Approved Document K, glazing in critical locations (doors, and side panels within 300mm of a door, up to 1500mm above floor level; other glazing below 800mm) must break safely, be robust or in small panes, or be permanently protected. Toughened and laminated safety glass are classified to BS EN 12600. Replacing only the glass in an existing frame is generally treated as a repair rather than notifiable work.