Trade toughened safety glass in Dundee and Angus
We supply toughened safety glass made to the sizes you give us and deliver across Dundee and Angus. Open a trade account, send your schedule and get an itemised quote.
- Guide trade price
- £45 to £120 per m², ex VAT, supply only, delivery extra
- Lead time
- The manufacturing time for toughened safety glass depends on the specification, and the date is confirmed on your order acknowledgement.
- Delivery area
- All of Dundee and Angus
- Regulations
- Scotland rules apply
Ordering toughened safety glass for jobs in Dundee and Angus
Each toughened pane carries a permanent mark to BS EN 12150, which helps when the installation is inspected.
Toughened glass cannot be cut, drilled or edged once it has been toughened. Every hole, notch and cut-out must be on the order before processing.
Specification at a glance
- Toughened to BS EN 12150
- Safety marking on each piece
- Clear, low-iron, tinted and obscure options
- Thicknesses typically from 4mm to 12mm
- Holes, notches and cut-outs before toughening
Delivery across Dundee and Angus
We deliver to sites and yards in Dundee and Angus as part of our mainland delivery service. Delivery is priced on the quote, so you know the full cost before you place the order.
Building regulations in Scotland
In Scotland, glazing in areas where people could collide with it must follow the safety glazing standard in Section 4 of the Technical Handbooks. Safety glass is classified to BS EN 12600.
We do not start manufacturing until you have approved the order acknowledgement. It repeats each size, colour and opening direction so you can check it against your survey.
Toughened safety glass in Dundee and Angus: common questions
Do you supply toughened safety glass across all of Dundee and Angus?
Yes. We deliver throughout Dundee and Angus, and the charge for your postcode is shown on the quote.
Which building regulations apply to jobs in Dundee and Angus?
The rules for Scotland apply. You can specify toughened safety glass to suit, and the performance values are stated on your quote. Your installer or designer remains responsible for compliance and any notification.
How do I get trade prices for Dundee and Angus?
Send your schedule through the quote form or by email, and apply for a trade account if you do not already have one.
What is heat-soak testing?
An extra process that reduces the risk of spontaneous breakage from nickel sulphide inclusions, often specified for overhead or high-risk glass.
Where do I need safety glass?
Building regulations require glazing in critical locations, such as doors, side panels and glazing near floor level, to break safely, be robust or in small panes, or be protected. Toughened or laminated safety glass is the usual way to meet that.